Work I've Done to My Ninja 250r Recently

Here is a list of things I have recently done to my Ninja.

 -replaced fuel filter(used a Briggs & Stratton found here)

 -added a louder horn(Fiamm 72112 Freeway Blaster Horn Low Tone found here) wired directly to the battery through a 12v 40amp 4 pin relay

 -wired a garage door opener to my high beam wire using this DIY

 -secured my cheapo watch under my ignition switch on the triple tree using outside double sided 3M tape

 -replaced the stock chain with green chain I found off Ebay back in 2011(here is the same chain on Amazon)

 -installed heater elements on the main and passenger seat(front: WarmSeats Waterproof Seat Heater, rear: I used the heat element from a grip warmer kit found on Ebay)

 -installed heated grips with the same kit as above
 -switched the stock front brake fluid cap for one with the Ninja logo on it found on Ebay

 -wired in a cigarette outlet

 -installed an accessory fusebox following this DIY

I still have to make a bracket for the switches and cigarette outlet, change the oil, inspect/adjust valve clearances, top off coolant, and synchronize the carbs.